PRODUCT / MONSOON X

PHOTO 01 / 04PACKAGE CONFIRMED WITH QUOTE

Controller

Monsoon X ECU

Monsoon X standalone engine management for a custom-wired engine installation.

Reference unit priceUS$703.89–777.99

Reference ranges vary with exchange rates and configuration. Final price, shipping and taxes are confirmed with your quote.

Exchange-rate reference: 2026-10-19

MODEL FAMILYMonsoon / Xtreme / Fury XHARDWARE & PACKAGEConfirm the exact configuration

Discuss This Product

Ask About Fitment

01 / JXPOWER

Controller configuration

Monsoon X standalone engine management for a custom-wired engine installation.

MonsoonX provides four injector and ignition drives, internal MAP sensing and a compact single-connector installation. VVT, closed-loop boost and motorsport functions share limited I/O, so an installation plan is needed before selecting optional functions.

PRODUCT-SPECIFIC CHECKS

Identify X-series hardware from the product label.
Check trigger, sensor, I/O and tuning requirements for this revision.
Confirm the correct connector and harness pinout; earlier Monsoon data is not a substitute.

02 / JXPOWER

Specifications & configuration checks

Identify the actual unit and revision before relying on a technical value. The quote confirms the requested sales configuration.

Reference model / part: 127-4000
Engine configuration: 4 cylinders / 2 rotors sequential with direct spark
Injector outputs: 4
Ignition outputs: 4
Auxiliary outputs: 6
Analogue inputs: 4
Digital inputs: 4
Temperature inputs: 2
Trigger inputs / signal: 2
Manifold pressure: Built-in MAP
Data logging: Current reference: 512 MB, 250 channels, 100 kHz aggregate maximum
Software / communication: PCLink G4X / Mini-B USB
CAN communication: 1
Connector / termination: 34-pin Superseal / 4-1437290-0
Operating supply: 6.5–24 V DC
ECU / component dimensions: 95 × 130 × 45 mm
Unit weight: 220 g

Reference specifications describe the documented model, not an inspected supply unit. Match the hardware and package before ordering.

Details to confirm before ordering

Supply the label, hardware revision and connector photographs so the supplied unit can be matched to this reference.
The figures below describe the current manufacturer reference. Older hardware / firmware must be checked individually, especially logging capacity and input sharing.

03 / JXPOWER

Compatibility & requirements

Match the exact hardware, connection and application. A model name, vehicle name or connector shape alone does not establish compatibility.

Identify X-series hardware from the product label.
Check trigger, sensor, I/O and tuning requirements for this revision.
Confirm the correct connector and harness pinout; earlier Monsoon data is not a substitute.

Bring your existing setup

Installation-specific wiring and connector termination
Sensors / actuators and their calibration or driver requirements
A matching tuning connection and computer setup

Check My Setup

04 / JXPOWER

What’s included — define the package

Included: confirm in the quote

Itemize the Monsoon X unit, connector / harness, tuning connection and documentation.

Required separately: check your installation

Installation-specific wiring and connector termination
Sensors / actuators and their calibration or driver requirements
A matching tuning connection and computer setup

Optional: discuss your application

Additional I/O or monitoring components for the project
Mounting or bypass hardware where required

These are package checks, rather than a guaranteed bill of materials. Your quote lists the actual supplied parts and quantities.

05 / JXPOWER

Installation & software

Use the exact ECU wiring diagram; verify every circuit for continuity and shorts before connecting power.
Choose PCLink for the correct G4+ or G4X generation. Set the trigger mode, synchronise base timing and allocate I/O before enabling boost, VVT or throttle control.

Check Installation Requirements

06 / JXPOWER

Manuals & resources

Read the model and revision information, or ask for a matching reference. Electronic downloads appear only when a corresponding file is available.

manual / INFORMATION

Monsoon X Manual & Wiring Information ↗

Check the Monsoon X model, wiring reference and document revision before installation.

guide / INFORMATION

Standalone ECU vs. Piggyback Controller ↗

Start with the control strategy, then work through the wiring, signals and tuning requirements.

Technical references

Reference model: Link G4X MonsoonX 127-4000 · Reviewed: 2026-10-22

Link G4X MonsoonX — current model reference ↗

Ask About Documents

07 / JXPOWER

Shipping & support

Destination, supply & timing

Share your country and postal code. Availability, preparation time, shipping method, charges and tax responsibilities are confirmed for the proposed package.

Shipping Information ↗

Coverage & assistance

Confirm product coverage and installation / tuning support with your quote. For an existing purchase, include the purchase reference, model and issue.

Warranty & Returns ↗

08 / JXPOWER

Questions about Monsoon X

Can all MonsoonX features run at once?

No. The manufacturer notes that simultaneous functions depend on their input and output requirements. Allocate channels for VVT, boost, sensors and switches before ordering a loom.

Will the FuryX USB cable fit MonsoonX?

MonsoonX uses a Mini-B tuning connection. The six-pin CUSB arrangement used by FuryX / XtremeX is a different connection.

Does the model number define cylinder support?

Check the injection and ignition strategy, shared channels and required auxiliary functions for the actual hardware. A model number alone does not define a complete engine-control configuration.

Discuss This Product Ask About This Product

EXPLORE / JXPOWER