PRODUCT / FIC6

PHOTO 01 / 04PACKAGE CONFIRMED WITH QUOTE

Controller

FIC6 Controller

FIC6 piggyback controller for tuning projects that retain the original engine ECU.

Reference unit priceUS$250.27–276.62

Reference ranges vary with exchange rates and configuration. Final price, shipping and taxes are confirmed with your quote.

Exchange-rate reference: 2026-10-19

MODEL FAMILYFICHARDWARE & PACKAGEConfirm the exact configuration

Discuss This Product

Ask About Fitment

01 / JXPOWER

Controller configuration

FIC6 piggyback controller for tuning projects that retain the original engine ECU.

F/IC6 works alongside the factory ECU, modifying injector pulses and selected sensor signals. Its ignition map removes timing; it is not an independent ignition ECU. The 30-1910 manual is the reference for this 6-channel family.

PRODUCT-SPECIFIC CHECKS

Identify the FIC6 label and hardware revision; do not substitute FIC8 wiring.
Check injector and ignition strategy, trigger signals and channel allocation together.
Keep any MAP rating in absolute pressure units; psia is not gauge boost.
Confirm the FICTuner release, connection and computer system for this controller.

02 / JXPOWER

Specifications & configuration checks

Identify the actual unit and revision before relying on a technical value. The quote confirms the requested sales configuration.

Reference model / part: 30-1910
Injector outputs: 6 intercepted injector channels
Calibration tables: 6 configurable maps, 21 × 17 cells
Fuel correction: Increase or decrease the factory injector pulse width
Ignition correction: Retard only; load from MAP, MAF or TPS
Manifold pressure: Internal MAP used as an absolute-pressure load input
Electrical signal: MAF, analogue A/B and O2 correction maps
Software / communication: AEM F/IC software / USB driver
Connector / termination: Reference universal loom: 46 unterminated wires

Reference specifications describe the documented model, not an inspected supply unit. Match the hardware and package before ordering.

Details to confirm before ordering

Supply the label, hardware revision and connector photographs so the supplied unit can be matched to this reference.

03 / JXPOWER

Compatibility & requirements

Match the exact hardware, connection and application. A model name, vehicle name or connector shape alone does not establish compatibility.

Identify the FIC6 label and hardware revision; do not substitute FIC8 wiring.
Check injector and ignition strategy, trigger signals and channel allocation together.
Keep any MAP rating in absolute pressure units; psia is not gauge boost.
Confirm the FICTuner release, connection and computer system for this controller.

Bring your existing setup

Installation-specific wiring and connector termination
Sensors / actuators and their calibration or driver requirements
A matching tuning connection and computer setup

Check My Setup

04 / JXPOWER

What’s included — define the package

Included: confirm in the quote

Itemize the controller, universal harness, tuning connection, pressure hose, bypass wiring and any software media separately.

Required separately: check your installation

Installation-specific wiring and connector termination
Sensors / actuators and their calibration or driver requirements
A matching tuning connection and computer setup

Optional: discuss your application

Additional I/O or monitoring components for the project
Mounting or bypass hardware where required

These are package checks, rather than a guaranteed bill of materials. Your quote lists the actual supplied parts and quantities.

05 / JXPOWER

Installation & software

Use the exact ECU wiring diagram; verify every circuit for continuity and shorts before connecting power.
Retain the original ECU. Identify tap versus intercepted circuits, then verify crank / cam polarity and injector routing with the matching AEM manual.

Check Installation Requirements

06 / JXPOWER

Manuals & resources

Read the model and revision information, or ask for a matching reference. Electronic downloads appear only when a corresponding file is available.

manual / INFORMATION

FIC Controller Manual & Wiring Information ↗

Check the FIC Controller model, wiring reference and document revision before installation.

software / INFORMATION

FIC Software Information ↗

Check FIC hardware, tuning software, interface and computer requirements together.

guide / INFORMATION

FIC6 and FIC8: Questions to Ask ↗

Check the controller revision and channel strategy before comparing two similar model names.

guide / INFORMATION

Standalone ECU vs. Piggyback Controller ↗

Start with the control strategy, then work through the wiring, signals and tuning requirements.

Technical references

Reference model: AEM F/IC6 30-1910 · Reviewed: 2026-10-22

AEM 30-1910 F/IC6 — installation manual, August 2013 ↗

Ask About Documents

07 / JXPOWER

Shipping & support

Destination, supply & timing

Share your country and postal code. Availability, preparation time, shipping method, charges and tax responsibilities are confirmed for the proposed package.

Shipping Information ↗

Coverage & assistance

Confirm product coverage and installation / tuning support with your quote. For an existing purchase, include the purchase reference, model and issue.

Warranty & Returns ↗

08 / JXPOWER

Questions about FIC6

Can F/IC6 advance ignition?

No. The referenced AEM ignition map accepts negative corrections to retard timing. Choose the control strategy around this limitation.

Is the F/IC6 universal harness plug-and-play?

The universal flying-lead loom requires vehicle-specific wiring. A matching patch harness and bypass plug are separate package checks.

Does the model number define cylinder support?

Check the injection and ignition strategy, shared channels and required auxiliary functions for the actual hardware. A model number alone does not define a complete engine-control configuration.

Discuss This Product Ask About This Product

EXPLORE / JXPOWER