Ignition moduleBoost & Ignition
Dual Ignition Module
Reference unit priceUS$75.08–82.99
Dual ignition module for an appropriately matched ECU and coil circuit.
View Product← Back to resultsAsk About Documents Ignition module 
Boost controller
PRODUCT / WATER / METHANOL INJECTION KIT
PHOTO 01 / 04PACKAGE CONFIRMED WITH QUOTE
Injection kit
Water / Methanol Injection Kit
Water / methanol injection kit for a separately planned intake-injection system.
Reference unit priceUS$547.47–605.11
Reference ranges vary with exchange rates and configuration. Final price, shipping and taxes are confirmed with your quote.
Exchange-rate reference: 2026-10-19MODEL FAMILYWater / methanolHARDWARE & PACKAGEConfirm the exact configuration
01 / JXPOWER
Driver & component configuration
Water / methanol injection kit for a separately planned intake-injection system.
The AEM V2 reference uses progressive water / methanol injection with a high-pressure pump and a Boost Safe output. The 2017 manual describes a 1-gallon tank, whereas the original listing mentions 1.15 gallons. Resolve the kit revision and reservoir size before applying its bill of materials.
PRODUCT-SPECIFIC CHECKS
- Identify controller, pump, nozzle and fluid compatibility.
- Check supply, triggering, hose / fitting sizes and mounting.
- Confirm reservoir, nozzle count, wiring and any separate level / flow monitoring.
02 / JXPOWER
Specifications & configuration checks
Identify the actual unit and revision before relying on a technical value. The quote confirms the requested sales configuration.
- Reference model / part
- 30-3300 V2 / manual 10-3300, 2017-02-01
- Pressure range / rating
- Reference V2 pump: 200 psi
- Fluid / system
- Water / methanol; AEM recommends no more than 50% methanol
- Item scope
- Reference jets: 250 / 500 / 1000 cc/min; actual kit to confirm
- Electrical signal
- Progressive pump control and Boost Safe protection output
- Version identification
- V2 / V3 and 1 / 1.15 gallon tank must be distinguished
Reference specifications describe the documented model, not an inspected supply unit. Match the hardware and package before ordering.
Details to confirm before ordering
- Supply the label, hardware revision and connector photographs so the supplied unit can be matched to this reference.
03 / JXPOWER
Compatibility & requirements
Match the exact hardware, connection and application. A model name, vehicle name or connector shape alone does not establish compatibility.
- Identify controller, pump, nozzle and fluid compatibility.
- Check supply, triggering, hose / fitting sizes and mounting.
- Confirm reservoir, nozzle count, wiring and any separate level / flow monitoring.
Bring your existing setup
- Appropriate controller output / driver and power wiring
- Matching mechanical / fluid connections
- Installation-specific fittings, protection and mounting
04 / JXPOWER
What’s included — define the package
Included: confirm in the quote
Request an itemized pump, controller, reservoir, nozzle, hose, fittings and wiring list rather than assuming “kit” includes every part.
Required separately: check your installation
- Appropriate controller output / driver and power wiring
- Matching mechanical / fluid connections
- Installation-specific fittings, protection and mounting
Optional: discuss your application
- Additional sensing or monitoring for the installation
- Reservoir, nozzle or connection additions if outside the confirmed kit
These are package checks, rather than a guaranteed bill of materials. Your quote lists the actual supplied parts and quantities.
05 / JXPOWER
Installation & software
- Follow the exact kit manual: keep the reservoir below the injection point, protect hoses from heat and abrasion, and mount the V2 controller in a dry cabin location.
- Test flow and the fail-safe response before tuning an engine that relies on injection. Do not use an unverified spray system as the sole protection against detonation.
06 / JXPOWER
Manuals & resources
Read the model and revision information, or ask for a matching reference. Electronic downloads appear only when a corresponding file is available.
Technical references
Reference model: AEM 30-3300 V2 — reference only, supplied tank / revision pending · Reviewed: 2026-10-22
07 / JXPOWER
Shipping & support
Destination, supply & timing
Share your country and postal code. Availability, preparation time, shipping method, charges and tax responsibilities are confirmed for the proposed package.
Shipping Information ↗Coverage & assistance
Confirm product coverage and installation / tuning support with your quote. For an existing purchase, include the purchase reference, model and issue.
Warranty & Returns ↗08 / JXPOWER
Questions about Water / Methanol Injection Kit
Is this definitely the 1.15-gallon V2 kit?
The sources conflict. The archived V2 manual describes 1 gallon, while the listing title says 1.15. Confirm the controller, pump and tank labels before quoting a complete kit.
Can it run pure methanol?
AEM recommends no more than 50% methanol for safety. Follow the exact kit's fluid and handling instructions.
What does “kit” include?
Ask for controller, driven part, pump / reservoir / nozzle where applicable, hoses, fittings and wiring to be listed individually. The word kit does not establish a universal contents list.
EXPLORE / JXPOWER
Also in this collection
Browse alternatives in the same collection. These links do not establish an accessory or compatibility relationship.
Ignition moduleBoost controllerBoost & Ignition
Boost Controller
Reference unit priceUS$250.27–276.62
Boost-control component for a matched turbocharger and wastegate setup.
View ProductWater / Methanol Injection Kit
Discuss This ProductReference unit priceUS$547.47–605.11