PRODUCT / XTREME X / FURY X

PHOTO 01 / 04PACKAGE CONFIRMED WITH QUOTE

Main harness

Xtreme X / Fury X Harness

Main wiring harness for connecting Xtreme X / Fury X to an engine-management installation.

Reference unit priceUS$132.95–146.96

Reference ranges vary with exchange rates and configuration. Final price, shipping and taxes are confirmed with your quote.

Exchange-rate reference: 2026-10-19

MODEL FAMILYMonsoon / Xtreme / Fury XHARDWARE & PACKAGEConfirm the exact configuration

Discuss This Product

Ask About Fitment

01 / JXPOWER

Wiring & mounting configuration

Main wiring harness for connecting Xtreme X / Fury X to an engine-management installation.

A/B looms give Link XtremeX and FuryX installations both ECU connector groups. Each ECU-side plug is terminated and the opposite ends are wired to the engine installation. The shared connector family does not remove the need for the exact model pinout.

PRODUCT-SPECIFIC CHECKS

Identify the exact target X-series controller.
Confirm which A/B connectors and branches are supplied.
Check pinout, length, seals and terminal / lead contents.

02 / JXPOWER

Specifications & configuration checks

Identify the actual unit and revision before relying on a technical value. The quote confirms the requested sales configuration.

Application reference: Reference: G4X XtremeX / FuryX; also selected earlier models
Connector / termination: A and B ECU connectors; flying leads
Harness / cable length: Manufacturer options include 0.4 / 2.5 / 5 m; select actual length
Item scope: A loom and B loom are separate parts in the manufacturer catalogue

Reference specifications describe the documented model, not an inspected supply unit. Match the hardware and package before ordering.

Details to confirm before ordering

Confirm the actual loom length, connector keying, populated pins, wire sizes and supplied relay / fuse hardware.

03 / JXPOWER

Compatibility & requirements

Match the exact hardware, connection and application. A model name, vehicle name or connector shape alone does not establish compatibility.

Identify the exact target X-series controller.
Confirm which A/B connectors and branches are supplied.
Check pinout, length, seals and terminal / lead contents.

Bring your existing setup

Matching controller and hardware revision
Application pinout or mounting dimensions
Any wiring assembly, crimping or installation parts outside the quoted item

Check My Setup

04 / JXPOWER

What’s included — define the package

Included: confirm in the quote

Request the A/B harness contents separately from a loose connector set or controller.

Required separately: check your installation

Matching controller and hardware revision
Application pinout or mounting dimensions
Any wiring assembly, crimping or installation parts outside the quoted item

Optional: discuss your application

Additional branches, terminals or mounting pieces after the scope is checked

These are package checks, rather than a guaranteed bill of materials. Your quote lists the actual supplied parts and quantities.

05 / JXPOWER

Installation & software

Use the exact ECU wiring diagram; verify every circuit for continuity and shorts before connecting power.
Route trigger and sensor wiring away from ignition coils, alternators and high-current wiring; provide strain relief and protected power feeds.

Check Installation Requirements

06 / JXPOWER

Manuals & resources

Read the model and revision information, or ask for a matching reference. Electronic downloads appear only when a corresponding file is available.

guide / INFORMATION

What Does an ECU Setup Include? ↗

Separate the controller, supplied wiring, required extras and optional parts before you order.

Technical references

Reference model: Link A + B flying-lead loom reference · Reviewed: 2026-10-22

Ask About Documents

07 / JXPOWER

Shipping & support

Destination, supply & timing

Share your country and postal code. Availability, preparation time, shipping method, charges and tax responsibilities are confirmed for the proposed package.

Shipping Information ↗

Coverage & assistance

Confirm product coverage and installation / tuning support with your quote. For an existing purchase, include the purchase reference, model and issue.

Warranty & Returns ↗

08 / JXPOWER

Questions about Xtreme X / Fury X

Is an A loom alone enough for FuryX?

A full FuryX / XtremeX installation uses both connector groups. Confirm whether the sales item contains A only, B only or both.

Do all A/B harnesses share one pinout?

Connector compatibility does not guarantee every ECU circuit has the same function. Follow the ECU generation and model wiring diagram.

Is this a complete terminated harness?

Check the individual item. A loose connector / terminal set, universal flying-lead harness and vehicle adapter are different products. The quote should identify length, endpoints and termination.

Discuss This Product Ask About This Product

EXPLORE / JXPOWER